Product Description
Detailed Photos
Application Scope
Product Parameters
| Voltage |
220V/380V 50Hz |
| Power |
35Kw |
| Air Consumption |
Air pressure: 20.6 Mpa |
| Weight |
3000*2500*3500mm |
| Size |
1800KG |
Product Description
FUNCTIONS AND FEATURE
- The machine is suitable for filling milk, juice, soymilk, and other beverages.
- The machine automatically performs the following steps: Form Feed-sterilize-filling-shaping-sealing.
- PLC human control with an intuitive Human-Machine Interface that displays in English and Chinese.
- Low fault rate and easy operation.
- Automatically completes all job steps, including scroll run, batch numbering, plastic tape sticking, sterilizing, cylinder rolling, material filling, sealing-off, molding, cutting, and horn-shaped formation.
- 1. Aseptic conveying is actually the aseptic conveying from ultra-high temperature sterilization equipment to aseptic filling machines. Aseptic conveying requires the middle pipelines and equipment to be able to be disinfected and kept closed. The AP sterile group valve of this machine can be connected to the intermediate conveying pipeline.
- After sterilization, please refer to the overview diagram of the sterile system below. This machine uses hydrogen peroxide with a concentration of 35%, and when heated to around 75 degrees, the packaging material passes through the hydrogen peroxide water tank. The sterilization effect of hydrogen peroxide is utilized to sterilize the packaging material (according to the demonstration design by Tetra Pak, the time for the packaging material to pass through the hydrogen peroxide water tank is not less than 6.6 seconds, which can fully ensure the sterilization effect of the packaging material). Note: The sterilization efficiency of hydrogen peroxide is related to concentration, temperature, and time
- A sterile environment, please refer to the overview diagram of the sterile system below. The air is sterilized at high temperature by an ultra-high temperature heater, cooled, and then enters the sterile room to maintain a certain positive pressure. (From the figure, it can be seen that sterile air is replaced through circulation, which has two functions. One is the replacement of new and old sterile air, and the other is the removal of hydrogen peroxide molecules from the sterile room and their dissolution with water before being discharged into the dilution tank, which is beneficial for environmental protection.) The establishment of a sterile environment can be summarized in three sentences:
1) Use hot sterile air to carry atomized hydrogen peroxide and spray it into a closed area.
2) The atomized hydrogen peroxide is liquefied and then dried with hot sterile air.
3) After drying, use cooled sterile air to maintain positive pressure in the sterile room.
The above three points can be understood in combination with spray and drying in the next section. In the four stages of aseptic filling, "sterilized packaging materials" and "sterile environment" are achieved by this machine
For more information, please contact Shean (Cangzhou) Corp., Ltd.
Workshop Spare Parts
FAQ
1. Can you guarantee your quality if we order on you ?
Of course.Best quality is our principle all the time.You can be assured on our production.
2.What should I do if we are not able to operatethe the machine when we receive it?
Operation manual guides you the installation.Besides, we haveprofessional after-sale groupto customer 's site to solve any problems.weprovide 7*24 hours on-line technical support.
3.How could I get the spares on machines?
We will send extra sets of easy broken spares andaccessories likeo ring etc.Non-artificial damagedspares will be sent freelyduring 1 year 's warranty.
4.How to maintain such a machine ?
Please clean every part after filling thus can givelong using life of machine and make a carefullyclean 3 times a year.
){kind=link}